Plain Weave Sintered Square Woven Wire Mesh Used For Polymer Production

Plain Weave Sintered Square Woven Wire Mesh Introduction

Plain weave sintered square woven wire mesh is made by sintering multiple layers of plain weave square woven mesh together, and its cross section structure as below picture. Because of the large open area percentages of the square woven wire mesh layers, this type of sintered wire mesh has good permeability characteristics and low resistance to flow. It can be designed with any number and combination of square plain weave wire mesh layers to achieve particular flow and filtration characteristics. It is useful for polymer production, as well as a variety of fluid and air filtration applications.

Another possibility with this type of stainless steel sintered wire mesh is the ability to sinter a large number of layers of square woven wire mesh together to form parts that are very thick and useful as flame and detonation arrestors. These laminates can be inches thick and still be made with high flow characteristics.

Types of sinter mesh filters we supply:

standard combination of 5-layer sintered wire mesh.
sintered together by many layers of plain-woven square mesh.
sintered together by many layers of dutch-woven square mesh.
sintered by perforated plate and multi-layer stainless steel wire mesh.
Our sintered mesh panels may be formed into filter elements such as filter discs, cartridges, cones, cylinders, and tube.

Super Sintered Wire Mesh Characterastics:

Advantages:

High strength and durability since high temperature sintering.
Anti-corrosion, and heat resistance up to 480 °C.
Steady filter rating from the 1micron to 100 micron.
Filter mesh not easy to deform because of two protective layers.
Can used for uniform filtration in high pressure or high viscosity environment.
Suits for cutting, bending, punching, stretching, and welding.

Application:

Sinter wire mesh filters are usually used for purification and filtration of liquid and gas, separation and recovery of solid particle, transpiration cooling under extremity high temperature, control air flow distribution, enhancement of heat and mass transfer, noise reduction, current limitation, and wildly used in aerospace, petrochemical industry, pharmaceutical industry, environmental protection industry.

Square plain woven sintered mesh cross section structure

Packing: warped with waterproof paper or plastic film, then in the wooden cases/ pallets. Or as your requests.

Anping tenglu metal wire mesh co.,ltd,is a manufacture and exporter of stainless steel wire mesh product.

We are located in wire mesh industrial base Anping city,Hebei province in China.

Our product range is as below,

Stainless steel woven wire mesh

Welded wire mesh

Crimped wire mesh

Hexagonal wire mesh

Knitted wire mesh

Wire mesh filter

Window screen

It have been 15 years that we manufacture and export wire mesh product,our professional responsible attitude and our strictly management technique ensure us standing in the leading position of wire mesh industry.We welcome your enquiry.

Our architectural mesh List:

Sintered Mesh
Plain Weave Sintered Mesh
Dutch Woven Sintered Wire Mesh
Perforated Metal Sintered Wire Mesh
Brass Pneumatic Mufflers / Sintered Silencer
Stainless Steel Pneumatic Mufflers / Sintered Silencer
Sintered Filter Elements
Sintered Mesh Filter Cartridges
Sintered Metal Filter Disc
Sintered Wire Mesh Laminates
Sintered Tube Filter
Stainless Steel Sintered Fiber Felt
Iron-Chromium-Aluminum Fiber Felt
Sintered Stainless Steel Powder Filter Element
Titanium Powder Sintered Filter
Sintered Copper Powder Filter Elements
Five-Layer Sintered Mesh
Sintered Mesh Laminate
Sintered Mesh With Perforated Metal
Sintered Metal Filter Cartridge
Pleated Sintered Mesh Filter
Sintered Mesh Cone Filter
Sintered Metal Fiber Felt

Anping Qianpu Wire Mesh Products Co., Ltd. is a metal mesh manufacturing company headquartered in China.
Focuses on the production of various metal mesh products, including stainless steel mesh, copper mesh, nickel mesh, iron wire mesh, etc.
The company has advanced production equipment and technical team, adhering to the concept of high quality, high efficiency and innovation, and constantly improving product quality and technical level.
In the past few years, QIANPU has achieved steady growth and good development.
The company not only occupies a certain share in the domestic market, but also exports to many countries and regions, such as the United States, Europe, Southeast Asia, etc.
The company's products have been recognized and praised by customers, and have won a good reputation and word of mouth.
The company's development goal is to become a global leading metal mesh manufacturer, providing customers with high-quality products and professional services.
Through continuous innovation and technological upgrading, QIANPU will continue to maintain its competitive advantage and achieve sustainable development.

QIANPU is a company specializing in the production and sale of wire mesh.
They mainly produce various types of wire mesh, including stainless steel wire mesh, galvanized wire mesh, aluminum wire mesh, etc.
These wire meshes are widely used in construction, engineering, chemical industry, metallurgy, aerospace and other fields.
In addition to wire mesh, the company also provides customized wire mesh products, which can be customized according to customer needs. Wire mesh products of different specifications and sizes.
They also provide wire mesh processing services, which can be processed and produced according to the design drawings provided by customers to ensure that the products meet customer requirements.
QIANPU is committed to providing high-quality wire mesh products and excellent services to meet the different needs and requirements of customers.
Through continuous innovation and optimization of products, the company enjoys a high reputation and popularity in the wire mesh industry.
Their products and services have been widely recognized and praised in domestic and foreign markets.